Products commonly used in this industry

  • Energy and Utilities

    5025E Multifunction Calibrator

    • 40 ppm precision calibrator
    • 0 to 1050 V AC/DC voltage
    • 0 to 22 A AC/DC current
    • Resistance and capacitance
    • Thermocouple and Pt100 simulation
    • Clamp meter and power calibration
    • Optional oscilloscope calibration
    View 5025E
  • Energy and Utilities

    5025C Multifunction Calibrator

    • 15 ppm precision calibrator
    • 0 to 1050 V AC/DC voltage
    • 0 to 22 A AC/DC current
    • 1 Ω to 1.1 GΩ variable resistance
    • Thermocouple and Pt100 simulation
    • Clamp meter and power calibration
    • Capacitance and inductance
    View 5025C
  • Energy and Utilities

    1044 Voltage and Current Calibrator

    • Measure voltage and current
    • Source voltage and current
    • 3 voltage ranges 0 to 20 V
    • 3 current ranges 0 to 20 mA
    • Accuracy 0.05 %
    • 4.5 digit LCD display
    • Portable with 28 hours typical battery life
    View 1044
  • Energy and Utilities

    1051 Resistance Decade Box

    • 0.01 Ω to 1 MΩ
    • High accuracy and stability
    • Simple operation with clear visual indication
    • Suitable for Pt100 simulation
    • Low temperature coefficient
    • Safety terminals
    • Removable protective cover
    View 1051
  • Energy and Utilities

    1040 Resistance Decade Box

    • 1 Ω to 100 MΩ
    • High accuracy
    • Clear visual indication
    • High stability
    • Safety terminals
    • Low temperature coefficient
    • Supplied with protective cover
    View 1040
  • Energy and Utilities

    1048 Voltage/Current/Loop Calibrator

    • Source/measure voltage and current
    • 3 source ranges: 0 to 22 mA & 0 to 22 V
    • 3 measure ranges: 0 to 70 mA & 0 to 50 V
    • Accuracy 0.02 %
    • Transmitter simulator/sink loop control
    • Output steps and ramps
    • Fine adjustment
    View 1048
  • Energy and Utilities

    1049 Pt100 Simulator

    • –200 °C to +800 °C
    • ± 0.3 °C accuracy
    • Based on ITS 90 EN 60751
    • 23 set points
    • Exceeds class A
    • Good temperature stability
    • Passive resistance source
    View 1049
  • Energy and Utilities

    1067 Precision Resistance Decade Box

    • 10 mΩ to 12 kΩ
    • 0.01 % accuracy
    • Precision Pt100 simulation
    • 6 digit resolution
    • Better than 20 ppm/year stability
    • Residual resistance < 10 mΩ
    • Fully screened
    View 1067
  • Energy and Utilities

    5030 Electrical Tester Calibrator

    • RCD: 3 to 2500 mA, 10 to 2000 ms
    • Loop 50 mΩ to 1.8 kΩ
    • Insulation up to 2 GΩ / 1 kV
    • Continuity 0.1 Ω to 10 kΩ
    • RS-232 / USB Control
    • Fast and intuitive user interface
    • Regional test sockets available
    View 5030
  • Energy and Utilities

    5051Plus Multifunction Calibration System

    • Combined calibrator/multimeter/PC
    • 0 to 1050 V & 0 to 22 A (AC/DC)
    • Source up to 1 GΩ resistance
    • Thermocouple simulate & measure
    • Pt100 simulate & measure
    • Capacitance and inductance
    • Oscilloscope calibration
    View 5051Plus
  • Energy and Utilities

    5065 6.5 digit Multimeter

    • DC V to 1000 V, AC V to 750 V
    • AC/DC current to 3 A
    • Two and four wire resistance
    • Frequency from 3 Hz to 300 kHz
    • Period and diode measurement
    • Temperature measurements
    • USB interface, optional GPIB
    View 5065
  • Energy and Utilities

    5069 Insulation Tester Calibrator

    • 100 kΩ to 100 GΩ
    • Basic accuracy 1 %
    • Up to 10 kV operation
    • Portable with battery operation
    • Fully shrouded safety connectors
    • Display of open circuit voltage
    • Display of short circuit current
    View 5069
  • Energy and Utilities

    5070 Micro-Ohmmeter Calibrator

    • Calibrate ductor testers
    • Calibrate micro-ohmmeters
    • 0.2, 2, 20, 200, 2000 mΩ
    • 5 cal points: 0/25/50/75/100 %
    • Gold plated terminals
    • Low thermal EMF connection
    • Portable robust carrying case
    View 5070
  • Energy and Utilities

    CalBench Calibration Benches

    • Universal calibration systems
    • Electrical/pressure/process
    • Power supplies, DMMs & scopes
    • Multifunction calibrator modules
    • Ideal for on-site test facilities
    • Automatic or manual calibration
    • Complete lab design service
    View CalBench
  • Energy and Utilities

    8030 Automatic Pressure Controller

    • Configurable pneumatic controller
    • Up to 3 internal sensors for -1 to 100 bar
    • Dual sensor versions to 230 bar
    • Accuracy per sensor: 0.01 % FS
    • Touch screen user interface
    • Virtual control app & EasyCal software
    • Barometric reference option
    View 8030
  • Energy and Utilities

    7006 Loop Simulator & Source

    • 4 to 20 mA or 0 to 10 V loops
    • 7 calibration set-points
    • Accuracy 0.1 %
    • TxSim and RxTest modes
    • Autostep output - adjustable rate
    • Battery powered PP3
    • Internal loop drive supply
    View 7006
  • Energy and Utilities

    7007 Loop Signal Indicator

    • 4 - 20 mA, 0 -10 V, 0 - 50 V ranges
    • LCD 4 digit display, mA, V, % of rng
    • Accuracy 0.05 %
    • RxSim, TxTest, or 50 mA/50 V modes
    • Internal loop supply, 25 mA max
    • Battery powered 9 V PP3
    • Supplied with carry case & test leads
    View 7007
  • Energy and Utilities

    7090 Pneumatic Calibration Pump

    • Pressure to 40 bar (600 psi)
    • Vacuum to -950 mbar
    • Oversized check valve
    • Contoured cushioned handles
    • Protective caging for vent valve
    • Hose, fittings, & carry case supplied
    • Optional digital gauges
    View 7090
  • Energy and Utilities

    7095 Hydraulic Calibration Pump

    • 0 to 700 bar (10,000 psi) 
    • Priming feature for fast air purge 
    • Oversized check valve
    • Contoured cushioned handles
    • Built-in pressure relief valve  
    • Hose, fittings, & carry case supplied
    • Optional digital gauges
    View 7095