The 8030 is an advanced pressure controller/calibrator suitable for wide workload
calibration of pressure devices such as transmitters, sensors and gauges. The standard
unit can be configured for multiple ranges from vacuum to 100 bar (1500 psi), integrating
up to three high accuracy reference sensors for maximum workload coverage.
Additionally a barometric reference option enables absolute pressure emulation.
High range dual sensor versions up to 230 bar (3350 psi) are also available.
Due to its fully configurable design, the 8030 offers the maximum flexibility to end user requirements. Accuracy is 0.01 % FS for each internal sensor fitted, and control stability is
0.005 % FS of the active sensor range. This provides the necessary coverage for applications
with outstanding accuracy, control and speed for testing applications.
With up to three sensors integrated into the instrument the user is always offered an
optimal calibration solution over a very wide pressure range. The 8030 is suitable as a
high performance pressure standard in process plants, factories and calibration labs.
Routine testing of pressure instrumentation is made quick and simple, whether using the
8030 touch screen display or via EasyCal calibration software.
Configurable pneumatic controller
Up to 3 internal sensors for -1 to 100 bar
Dual sensor versions to 230 bar
Accuracy per sensor: 0.01 % FS
Touch screen user interface
Virtual control app & EasyCal software
Barometric reference option
Control stability per sensor: 0.005 % FS
Gauge, compound, absolute, differential
Intuitive User Interface
The 8030 features a colour touch-screen interface with user-friendly menus designed for simple operation, enabling users to quickly learn and master the operation of the module. Manually specifying pressure set points is made simple with clearly defined controls on the display.
The 8030 auto-ranging capabilities enable each sensor to be actuated as pressure increase or decreases, providing optimal control and accuracy when performing applications
Supplied Accessories and Options
The 8030 is supplied with a benchtop 2 port manifold (model 7161) and contamination trap (model 7115) as standard. Options include the 7165 compact compressor pumps that can supply pressure up to 70 bar. Vacuum pumps, UUT stands, adaptor kits, fittings and hoses are also available to optimise user set ups and applications.
The 8030 also comes with a virtual control panel software application that provides a simple user interface for remote operation on a laptop or PC. Set and output pressure, and use the primary front panel buttons as per the instrument display.
EasyCal Calibration Software
The 8030 can be controlled via Time Electronics EasyCal
software to automate testing procedures. Software driven calibration enables users to perform rapid calibrations on instrumentation such as pressure gauges, sensors and transmitters.
Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance.
–1 to 100 bar (1500 psi). Configured based on customer range requirement. High pressure models: 0 to 140 bar (2000 psi), 0 to 200 bar (3000 psi), 0 to 230 bar (3350 psi)
3 in total plus 1 barometric reference. High pressure models: 2 in total plus 1 barometric reference.
Gauge, compound, absolute and differential
Accuracy (per sensor)
0.01 % FS. 0.03 % FS for low range and differential sensors (30 mbar to 300 mbar)
< 0.005 % FS
Barometric reference option
Enables user to switch from gauge to absolute pressure. Measuring range: 800 to 1,200 mbar absolute. Accuracy: 0.01 % RDG
20 selectable and 1 programmable
< 0.005 % FS of the active sensor
< 10 seconds
Minimess type with hoses supplied. BSP and NPT available
Clean, dry, non-corrosive, non-combustible and non-oxidising gases
150 % of the largest pressure range
Supply port pressure
Maximum 105 to 110 % FS
Test port pressure
Maximum 105 % FS
7 ” TFT colour touch-screen (4 wire resistive)
Up to 6 digits (user selectable)
RS-232 and ethernet
Approx. 10 ms
Approx. 10 minutes.
100 to 230 V AC, 50/60 Hz.
10 to 40 °C (50 to 104 °F).
0 to 70 °C (32 to 158 °F).
0 to 95 % (relative humidity without moisture condensation).
15 to 35 °C (59 to 95 °F).
W 235 x H 132 x D 375 mm
Approximately 12 kg depending on sensors ordered.
Contamination trap (model 7115), 2 port manifold (model 7161), hoses, fittings, power lead, user manuals.
Additional 8030 versions
0 to 140 bar (2000 psi), 0 to 200 bar (3000 psi), 0 to 230 bar (3350 psi).
High pressure models can have up to 2 internal sensors plus 1 barometric reference.
Hydraulic version up to 1000 bar (see 8030-H data sheet).