The CBP-PRES3 CalBench package is for calibrating pressure & process instrumentation. It is suitable for users that require a workstation that is easy to operate manually, but can also perform software driven calibration applications. This makes it an ideal solution for all skill levels, from technicians learning calibration, to experienced test engineers.
For pressure calibration, four high accuracy (0.02 % FS) digital gauge modules feature.
For pneumatic workload two gauge modules have regulators for output adjustment and setting. These cover vacuum to 7 bar (100 psi) and 20 bar (300 psi). The 7 bar module is typically fed line pressure from plant air and vacuum from the supplied 7149 electric pump. The 20 bar module from a compressed air cylinder (not supplied).
Additional pressure calibration can be performed using the digital gauge modules for 200 bar (3000 psi) and 700 bar (10,000 psi). These are commonly utilised with the supplied benchtop pumps that feature dual outputs to connect both the module and UUT. Manifolds, test stand, adaptors and fittings are also provided.
The 8060+ module situates centrally in the console, providing source, simulation and measurement of process signals, HART communication and 24 V loop power. It features an integral multimeter, and a PC control centre with 12.1” touch screen display. Pressure control and readback applications are included. EasyCal software communicates with pressure modules, and can be used for automated calibration and test management.
Pressure calibration and trainer CalBench
2 regulated pneumatic modules to 20 bar
Digital gauge modules for 200 & 700 bar
Process calibrator/multimeter/PC module
Source/measure V, I , Ω, Hz, temperature
Fixed & variable DC power supply modules
Pneumatic & hydraulic calibration pumps
Manifold, test stand, adaptors & fittings
Electrical vacuum pump, power switch on bench
Automated calibration using EasyCal software
Customisable pressure ranges (pre-order)
The CBP-PRES3 features four main pressure modules for calibration work. These include two regulated calibrator modules covering vacuum to 20 bar (300 psi), utilised with line pressure. Two digital gauge modules for 200 bar (3000 psi) and 700 bar (10,000 psi) are used with the supplied pneumatic and hydraulic pumps. Calibrate pressure instrumentation such as:
Analogue and digital gauges, indicators, manometers
Calibrators, sensors, transducers, transmitters
Switches, valves, controllers, chart recorders
The CBP-PRES3 is a primarily a pressure calibration system, but can also be used to check and verify functions on process instruments. It is also ideal for training to show a wide range of test and measurement applications.
Test process calibrators, mV/mA meters, decade boxes, flow totalizers
Add dry block calibrators for temperature calibration capabilities
Multifunction Process Calibrator and Control Centre Module
Advanced system package for precision source and measure
capabilities. Integral process calibrator, 6.5 digit multimeter, PC
and EasyCal software. Operation via 12.1 ” touch screen display.
Built-in communication with compatible modules.
Source and measure process signals for electrical, frequency,
temperature. Enables users to calibrate process instrumentation
like transmitters, RTDs, thermocouples and more. EasyCal
software and accessories included for automation,
administration and certificate generation.
For pneumatic calibration work up to 20 bar (300 psi), requires a line supply (24bar / 350 psi) typically from a gas cylinder, to enable setting of output with regulator. Can be used manually with pump also.