CBP-PROC2 Instrumentation Calibration Bench

New range of CalBench Packages launched – View here

The CBP-PROC2 package is a high performance calibration workstation for testing and verifying process instrumentation. It has modules and extras to enable users to rapidly calibrate common pressure and temperature instruments such as transmitters, gauges, RTDs and thermocouples. It is an optimal solution for instrument workshops where users need to centralise their calibration and commissioning processes.

The 8060+ module situates centrally in the console, providing source, simulation and measurement of process signals, HART communication and 24 V loop power. It features an integral multimeter, and a PC control centre with 12.1" touch screen display. Both manual control and EasyCal software driven calibration can be performed. EasyCal communicates with pressure modules and dry block calibrators.

The system provides users with an organised workspace for test and measurement workload. The accompanying products such as pumps, manifolds and test stands, are utilised for fast and efficient setups of applications. Storage solutions include a mobile drawer unit, under bench holder, and quick access perfo panel fittings including hooks, holders, shelf and storage bins. The package can be customised to specific requirements, change pressure ranges, exchange items or add products.

Features

Multifunction instrument calibration bench
Process calibrator/multimeter/PC module
Source/measure V, I , Ω, Hz, temperature
Auto-pneumatic pressure controller module
Regulate to 200 bar, measure to 700 bar
Includes dry block calibrator, inserts pack
Pumps, manifolds, fittings, UUT stand
Fixed & variable DC power supply modules
Environmental monitor/datalogger included
Automated calibration using EasyCal software

Pressure Calibration

For pressure an automatic controller module is used for pneumatic calibration from vacuum to 40 bar. A selection of precision measurement modules providing range coverage to 700 bar. Accompanying pneumatic and hydraulic pumps are supplied. Calibrate pressure instrumentation such as:

Analogue and digital gauges, indicators, manometers
Calibrators, sensors, transducers, transmitters
Switches, valves, controllers, chart recorders

Temperature Calibration

The CBP-PROC2 enables users to perform efficient calibration of temperature instrumentation. EasyCal can control the dry block calibrator whilst reading back the temperature measurement of the sensor under test on the 8060 module. Calibrate various products including:

Sensors, transmitters, indicators, thermometers
RTDs, thermocouples, recorders, controllers
Process calibrators, PRTs, thermistors

Additional Applications

The CBP-PROC2 is a primarily a process instrumentation calibration system, but can also be used to check and verify functions on electrical test equipment and other devices. The CalBench is also ideal for training and can show a wide range of testing applications common to industries.

Test process calibrators, mV/mA meters, decade boxes, flow totalizers
Calibrate DP flow transmitters, pulse meters, tachometers, counters
Train engineers & technicians instrumentation calibration
Run a complete calibration program with EasyCal software

EasyCal Calibration Software

The CBP-PROC2 comes with EasyCal software on the 8060 control centre. This enables software driven testing procedures and provides increased speed of calibration and consistency of results.

Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance.

Details

Bench Type and Fittings

Item	Qty	Code	Basic Description	Basic Purpose
1	1	7080-HD	CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm) Framework bench style with worktop, perforated panel, primary console with 7082 mains power controller module.	Provides an ergonomic workspace for various applications. Modules are fitted to the primary console for the necessary workload.
2	1	7137	Perfo Panel Option: 40 piece Tool Hook Kit	For holding various tools and accessories.
3	1	7139	Perfo Panel Option: Shelf (W 450 x D 250 x H 130 mm)	Suitable for storing equipment and tools.
4	1	7141	Perfo Panel Option: Storage Bin Strip (W 450 x H 75 mm) Supplied with 4 x 1 L bins.	For storage of components and small tools.
5	1	7157	Articulating Keyboard Tray for CalBench Supplied pre-fitted to worktop.	Situates the keyboard and mouse for the control centre module operations. Can be positioned under bench when not in use.
6	1	8134	Mobile 4 Drawer Unit, ESD, RAL 7035 light grey colour	Mobile storage that can situate under the CalBench.
7	1	7123	Under bench CPU/Dry Block Calibrator Holder	For storing a dry block calibrator when not in use.

Modules

Item	Qty	Code	Basic Description	Basic Purpose
8	1	8060+	Multifunction Process Calibrator and Control Centre Module Advanced system package for precision source and measure capabilities. Integral process calibrator, 6.5 digit multimeter, PC and EasyCal software. Operation via 12.1 ” touch screen display. Built-in communication with compatible modules.	Source and measure process signals for electrical, frequency, temperature. Enables users to calibrate process instrumentation like transmitters, RTDs, thermocouples and more. EasyCal software and accessories included for automation, administration and certificate generation.
9	1	CCPAD	Control Centre Numeric Keypad Module with jog dial	Provides an ergonomic method of using the control centre module without mouse or keyboard.
10	1	8030B/G40b/G20b/CV4b/BARO	Automatic Pressure Calibrator Module with multiple ranges Sensor 1: 0 to 40 bar (600 psi), 0.01 % FS accuracy. Sensor 2: 0 to 20 bar (300 psi), 0.01 % FS accuracy. Sensor 3: Vacuum to 4 bar (60 psi), 0.01 % FS accuracy. Sensor 4: Barometric Reference.	For automated pneumatic pressure calibration of gauges, transmitters etc. Auto-ranging capabilities across 3 sensors from vacuum to 40 bar (600 psi). Absolute pressure emulation with barometric reference. Supplied with contamination trap & hoses.
11	1	RMTEG-G200b/0.02	Digital Pressure Gauge Module with Regulator 0 to 200 bar (3000 psi), 0.02 % FS accuracy.	For high range pneumatic calibration work, with a line supply typically from a gas cylinder to enable regulator adjustment.
12	1	XTEG-G700b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 700 bar (10,000 psi), 0.02 % FS accuracy.	For hydraulic calibration with accompanying 7195 benchtop pump.
13	1	XTEG-G100b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 100 bar (1500 psi), 0.02 % FS accuracy.	For mid/high range pressure calibration work. Used with pump or T-piece method from controlled output module.
14	1	XTEG-CV20b/0.02/M	Pressure Measurement Module with Control Centre Interface Vacuum to 20 bar (300 psi), 0.02 % FS accuracy.	For reference pressure calibration. Used with pneumatic pump or T-piece method from controlled output module.
15	1	7056	Dual Adjustable DC Power Supply Module 2 x 30 V DC 3 A.	A variable DC supply to supplement various applications.
16	1	7087	Quad DC Power Supply Module 6 V (20 A), 12 V (10 A), 24 V (6 A), 48 V (3 A).	Provides a DC power supply to various instrumentation and devices under test.

Accompanying Products & Extras

Item	Qty	Code	Basic Description	Basic Purpose
17	1	7149	Electrical Vacuum Pump	Provides a vacuum for pressure modules.
18	1	7149-HCO	Housing & Connectivity Option for 7149 vacuum pump	Compact housing for the 7149 pump, situated under bench. Sound-proofed and power on/off via 7082 module on CalBench.
19	1	7195	Benchtop Hydraulic Pressure Calibration Pump Vacuum to 700 bar (10,000 psi).	Used for hydraulic pressure calibration with measurement modules.
20	1	7194A	Benchtop Pneumatic High Pressure Calibration Pump Vacuum to 200 bar (3,000 psi).	Pressure generation to 200 bar, suitable for use with pressure modules when compressed air source is not available.
21	1	7161P	Quad Port Benchtop Manifold For Pneumatic use from vacuum to 200 bar (3000 psi).	Pneumatic manifold that provides four output ports with hand-tight connectors for pressure instrumentation under test.
22	1	7198	Pressure Calibration Accessories Kit A comprehensive selection of fittings, adaptors and hoses.	Provides all the required pressure connections and fittings for modules and pumps to UUTs.
23	1	8100	Benchtop Instrumentation Test Stand	For fast and ergonomic positioning of UUTs like transmitters & gauges on the CalBench worktop.
24	1	8072	Dry Block Calibrator (28 to 660 °C) With metric multi hole insert (1x3, 2x4, 1x5, 1x6, 1x9 mm), blank insert, EasyCal software driver pre-configured on control centre.	Temperature source for the calibration of probes, RTDs, and thermocouples. Manual control and EasyCal software compatible to automate calibration applications.
25	1	8072-METP	Pack of 16 Metric Inserts for 8072 3 mm to 20 mm holes	Inserts for use with different probe sizes, used with 8072.
26	1	8002	CalBench Environmental Monitoring System With magnetic rear for perfo panel mounting.	Measures and logs temperature, relative humidity and barometric pressure, with control centre interface.
27	1	CERTS	Traceable Calibration Certificates For all test modules and additional test equipment.	Certifies all measurement modules and additional instruments have been tested in the TE factory to international standards.

Downloads

File Name	File Size	Language	Format
CBP-PROC2 CalBench Package Data Sheet	636 kB	EN	PDF

CalBench Packages Brochure

11.5 MB

PDF

Features

Pressure Calibration

Temperature Calibration

Additional Applications

EasyCal Calibration Software

Details

CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm)

Articulating Keyboard Tray for CalBench

Mobile 4 Drawer Unit, ESD, RAL 7035 light grey colour

Under bench CPU/Dry Block Calibrator Holder

Multifunction Process Calibrator and Control Centre Module

Control Centre Numeric Keypad Module with jog dial

Automatic Pressure Calibrator Module with multiple ranges

Digital Pressure Gauge Module with Regulator

Pressure Measurement Module with Control Centre Interface

Pressure Measurement Module with Control Centre Interface

Pressure Measurement Module with Control Centre Interface

Dual Adjustable DC Power Supply Module

Quad DC Power Supply Module

Electrical Vacuum Pump

Housing & Connectivity Option for 7149 vacuum pump

Benchtop Hydraulic Pressure Calibration Pump

Benchtop Pneumatic High Pressure Calibration Pump

Quad Port Benchtop Manifold

Pressure Calibration Accessories Kit

Benchtop Instrumentation Test Stand

Dry Block Calibrator (28 to 660 °C)

Pack of 16 Metric Inserts for 8072

CalBench Environmental Monitoring System

Traceable Calibration Certificates

Downloads

Request a price quote

CBP-PROC2 CalBench Package

Related Products

CBP-PROC1 CalBench Package

CBP-PROC3 CalBench Package

CBP-PRES1 CalBench Package

CBP-PRES2 CalBench Package