Products commonly used in this industry

  • Mining and Materials

    5025C Multifunction Calibrator

    • 15 ppm precision calibrator
    • 0 to 1050 V AC/DC voltage
    • 0 to 22 A AC/DC current
    • 1 Ω to 1.1 GΩ variable resistance
    • Thermocouple and Pt100 simulation
    • Clamp meter and power calibration
    • Capacitance and inductance
    View 5025C
  • Mining and Materials

    1051 Resistance Decade Box

    • 0.01 Ω to 1 MΩ
    • High accuracy and stability
    • Simple operation with clear visual indication
    • Suitable for Pt100 simulation
    • Low temperature coefficient
    • Safety terminals
    • Removable protective cover
    View 1051
  • Mining and Materials

    1040 Resistance Decade Box

    • 1 Ω to 100 MΩ
    • High accuracy
    • Clear visual indication
    • High stability
    • Safety terminals
    • Low temperature coefficient
    • Supplied with protective cover
    View 1040
  • Mining and Materials

    1048 Voltage/Current/Loop Calibrator

    • Source/measure voltage and current
    • 3 source ranges: 0 to 22 mA & 0 to 22 V
    • 3 measure ranges: 0 to 70 mA & 0 to 50 V
    • Accuracy 0.02 %
    • Transmitter simulator/sink loop control
    • Output steps and ramps
    • Fine adjustment
    View 1048
  • Mining and Materials

    1049 Pt100 Simulator

    • –200 °C to +800 °C
    • ± 0.3 °C accuracy
    • Based on ITS 90 EN 60751
    • 23 set points
    • Exceeds class A
    • Good temperature stability
    • Passive resistance source
    View 1049
  • Mining and Materials

    5065 6.5 digit Multimeter

    • DC V to 1000 V, AC V to 750 V
    • AC/DC current to 3 A
    • Two and four wire resistance
    • Frequency from 3 Hz to 300 kHz
    • Period and diode measurement
    • Temperature measurements
    • USB interface, optional GPIB
    View 5065
  • Mining and Materials

    5069 Insulation Tester Calibrator

    • 100 kΩ to 100 GΩ
    • Basic accuracy 1 %
    • Up to 10 kV operation
    • Portable with battery operation
    • Fully shrouded safety connectors
    • Display of open circuit voltage
    • Display of short circuit current
    View 5069
  • Mining and Materials

    CalBench Calibration Benches

    • Universal calibration systems
    • Electrical/pressure/process
    • Power supplies, DMMs & scopes
    • Multifunction calibrator modules
    • Ideal for on-site test facilities
    • Automatic or manual calibration
    • Complete lab design service
    View CalBench
  • Mining and Materials

    7090 Pneumatic Calibration Pump

    • Pressure to 40 bar (600 psi)
    • Vacuum to -950 mbar
    • Oversized check valve
    • Contoured cushioned handles
    • Protective caging for vent valve
    • Hose, fittings, & carry case supplied
    • Optional digital gauges
    View 7090
  • Mining and Materials

    7095 Hydraulic Calibration Pump

    • 0 to 700 bar (10,000 psi) 
    • Priming feature for fast air purge 
    • Oversized check valve
    • Contoured cushioned handles
    • Built-in pressure relief valve  
    • Hose, fittings, & carry case supplied
    • Optional digital gauges
    View 7095