CBP-ELEC2 Electrical Calibration Bench

New range of CalBench Packages launched – View here

A CalBench package that provides users with a combination of modules and accompanying products for calibrating electrical and electronic test equipment and devices. It allows users to test and verify a wide range of instruments, with a high level of automation to ensure rapid turnarounds.

The system features the 7051+ multifunction calibrator module with 12.1" control centre display. This module combines a high performance electrical calibrator (source) with a 6.5 digit multimeter (measure). It is supplied with a range of accessories for applications and EasyCal software for automated calibration, certificate creation and more.

Users can access the wide range of functions and features from one ergonomic and organised workspace. The control centre situates centrally in the console with communication to various modules. These include a 6 GHz frequency counter with power meter, 20 MHZ function generator and a 100 MHz oscilloscope. These are operated via software applications on the control centre. Further modules include variable AC and DC power supplies, an LCR meter and insulation tester calibrator.

A range of accompaniments for service work are also supplied. These include a high performance solder and re-work station, circuit board holder, turntable, service tool kit, ESD matting and magnifying lamp.

Features

Calibrate electrical & electronic test tools
Source/measure V, I , Ω, Hz, temperature
Electrical multifunction calibrator module
12.1” touch screen control centre
Oscilloscope, AFG & frequency counter
Variable AC and DC power supply modules
Precision LCR meter module
Insulation tester calibrator module
Environmental monitor/datalogger included
Solder and re-work station with accessories
Service tool case and ESD workstation kit

Calibration Capabilities

The CBP-ELEC2 has a combination of modules for precision calibration of various electrical and electronic test equipment including:

Multimeters, signal sources, clamp meters, data loggers
Continuity testers, decade boxes, RCL meters
Insulation testers, megohmmeters, optical tachometers
Oscilloscopes, frequency meters, frequency counters, timer counters
Transmitters, RTDs, thermocouples (electrical simulation & measurement)

Service and Repair Applications

The CBP-ELEC2 has modules and extras suitable for electrical and electronic diagnostics and repair work. The oscilloscope module is suitable for signal analysis and variable AC and DC power supplies can be used for testing and checking electronic equipment and components.

In addition to module operations the package includes a high performance solder and re-work station, magnifying lamp, circuit board holder, ESD kit with matting, and service tool case. This equipment is used on the bench for service applications commonly required in test facilities performing calibration work.

EasyCal Calibration Software

The CBP-ELEC2 comes with EasyCal software on the 7051 control centre. This enables software driven testing procedures and provides increased speed of calibration and consistency of results.

Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance.

Details

Bench Type and Fittings

Item	Qty	Code	Basic Description	Basic Purpose
1	1	7080-HD	CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm) Framework bench style with worktop, perforated panel, primary console with 7082 mains power controller module.	Provides an ergonomic workspace for various applications. Modules are fitted to the primary console for the necessary workload.
2	1	7185	ESD grey laminate worktop for CalBench Chipboard, conductive core, 3 mm ABS edges, antistatic, scratch, impact and stain resistant.	A high quality durable anti-static worktop for the CalBench.
3	1	7137	Perfo Panel Option: 40 piece Tool Hook Kit	For holding various tools and accessories.
4	1	7139	Perfo Panel Option: Shelf (W 450 x D 250 x H 130 mm)	Suitable for storing equipment and tools.
5	1	7141	Perfo Panel Option: Storage Bin Strip (W 450 x H 75 mm) Supplied with 4 x 1 L bins.	For storage of components and small tools.
6	1	7157	Articulating Keyboard Tray for CalBench Supplied pre-fitted to worktop.	Situates the keyboard and mouse for the control centre module operations. Can be positioned under bench when not in use.
7	1	8134	Mobile 4 Drawer Unit, ESD, RAL 7035 light grey colour	Mobile storage that can situate under the CalBench.

Modules

Item	Qty	Code	Basic Description	Basic Purpose
8	1	7051+	Multifunction Calibrator and Control Centre Module Advanced system package for precision source and measure capabilities. Integral calibrator, 6.5 digit multimeter, PC and EasyCal software. Operation via 12.1 ” touch screen display. Built-in communication with compatible modules.	Source and measure electrical, electronic, frequency, temperature. Enables users to calibrate process and electrical instruments like sensors, multimeters, clamp meters, scopes and more. EasyCal software and accessories included for automation, administration and certificate generation.
9	1	9769	7051 Internal Option: 2.2 GHz Levelled Sine Generator	An internally fitted option that enables the calibrator to output a pure sine wave up to 2.2 GHz, for calibration of oscilloscopes.
10	1	CCPAD	Control Centre Numeric Keypad Module with jog dial	Provides an ergonomic method of using the control centre module without mouse or keyboard.
11	1	CCSCOPE-2208B	Control Centre Integral Oscilloscope (2 channel) 100 MHz with connection module, control centre operation.	For basic R&M applications, fault finding and diagnostic work.
12	1	CC-FRQC	Control Centre Integral Frequency Counter & Power Meter 6000 MHz with connection module, control centre operation.	For frequency and power measurement applications in fault diagnostics and repair work.
13	1	CC-AFG20	Control Centre Integral Function Generator 20 MHz with connection module, control centre operation.	Used to generate different types of electrical waveforms over the frequency range, and frequency measurement for fault diagnostics and repair work.
14	1	5068B	Insulation Tester Calibration Module (100 kΩ to 10 GΩ)	For calibrating insulation testers and megohmmeters with test voltages up to 2.5 kV.
15	1	7033	High Precision LCR Meter Module (200 kHz)	Used to measure inductance, capacitance and resistance of components and devices at various frequencies.
16	1	7088D	Adjustable AC Supply Module with Digital Displays Variable output voltage from 0 to 110% above line input.	Provides variable 50 Hz AC power up to 10 A with two digital meters monitoring the output voltage and current. For general purpose use and R&M applications.
17	1	M-PSW250-4.5	Multi-Range DC Power Supply Module 0 to 250 V, 0 to 4.5 A, 360 W.	A regulated high range DC supply for inputting stable voltages, used for on-bench power to applications, and testing devices and circuits.

Accompanying Products & Extras

Item	Qty	Code	Basic Description	Basic Purpose
18	1	7145	High Performance Soldering/De-soldering/Rework Station Includes soldering iron, de-soldering tool & hot air rework tool, standard tips and nozzles.	High quality soldering, for electronics, components etc. A comprehensive unit that features a built-in pump for vacuum and air flow, and three simultaneously powered ports.
19	1	7146	Extra Solder Tips (6 piece set)	A selection of soldering tips for use with the 7035 module.
20	1	TL90	High Performance Magnification and Inspection Light	A magnifier with 48 premium LEDs to illuminate a 6 ” wide-angle, distortion-free lens. For inspection of circuit boards etc.
21	1	7180	Circuit Board Holder	For holding circuit boards with quick and easy rotation and component insertion/soldering.
22	1	7154	Benchtop turntable with locking mechanism	For practical placement of devices and parts being worked on.
23	1	7183	Electronic Service Case (76 tools)	A comprehensive selection of tools for electrical and electronic service work.
24	1	7186	ESD Workstation Kit for CalBench Benchtop mat, signage, bonding plugs, wrist strap & leads.	An antistatic mat to cover the benchtop when needed. A kit to eliminate static electricity and prevent ESD damage.
25	1	8002	CalBench Environmental Monitoring System With magnetic rear for perfo panel mounting.	Measures and logs temperature, relative humidity and barometric pressure, with control centre interface.
26	1	CERTS	Traceable Calibration Certificates For all test modules and additional test equipment.	Certifies all measurement modules and additional instruments have been tested in the TE factory to international standards.

Downloads

File Name	File Size	Language	Format
CBP-ELEC2 CalBench Package Data Sheet	640 kB	EN	PDF

CalBench Packages Brochure

11.5 MB

PDF

Features

Calibration Capabilities

Service and Repair Applications

EasyCal Calibration Software

Details

CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm)

ESD grey laminate worktop for CalBench

Articulating Keyboard Tray for CalBench

Mobile 4 Drawer Unit, ESD, RAL 7035 light grey colour

Multifunction Calibrator and Control Centre Module

7051 Internal Option: 2.2 GHz Levelled Sine Generator

Control Centre Numeric Keypad Module with jog dial

Control Centre Integral Oscilloscope (2 channel)

Control Centre Integral Frequency Counter & Power Meter

Control Centre Integral Function Generator

Insulation Tester Calibration Module (100 kΩ to 10 GΩ)

High Precision LCR Meter Module (200 kHz)

Adjustable AC Supply Module with Digital Displays

Multi-Range DC Power Supply Module

High Performance Soldering/De-soldering/Rework Station

Extra Solder Tips (6 piece set)

High Performance Magnification and Inspection Light

Circuit Board Holder

Benchtop turntable with locking mechanism

Electronic Service Case (76 tools)

ESD Workstation Kit for CalBench

CalBench Environmental Monitoring System

Traceable Calibration Certificates

Downloads

Request a price quote

CBP-ELEC2 CalBench Package

Related Products

CBP-ELEC1 CalBench Package

CBP-ELEC3 CalBench Package

CBP-RM1 CalBench Package

CBP-RM2 CalBench Package