CBP-WW1 Wide Workload CalBench

New range of CalBench Packages launched – View here

The CBP-WW1 is a CalBench package designed to provide users with a turnkey solution to calibrate instruments and devices used across industries. It offers a selection of features and functions to enable automated calibration of electrical, pressure and temperature instrumentation.

The system features the 7051+ multifunction calibrator module with 12.1" control centre display. This module combines a high performance electrical calibrator (source) with a 6.5 digit multimeter (measure). The control centre has manual control applications and EasyCal software for automated calibration & test management. EasyCal communicates with pressure modules and dry block calibrators. Also supplied are accessories and peripherals for EasyCal, including a printer kits for certificates and labels.

For pneumatic pressure the CalBench features a controller module for vacuum to 20 bar (300 psi), and a 200 bar (3000 psi) regulated module with digital gauge. Additional pressure calibration can be performed using high accuracy measurement modules for pneumatic and hydraulic applications. These are utilised with the supplied benchtop pumps that feature dual outputs to connect both the module and UUT. Manifolds, test stand, adaptors and fittings are also provided. For temperature calibration, two dry block calibrators are included for coverage from ambient to 1200°C.

Features

Multi-parameter CalBench system
Electrical, temperature, pressure
Multifunction calibrator/DMM/PC module
Source/measure V, I , Ω, frequency & more
Simulate & measure RTDs, thermocouples
Pneumatic & hydraulic pressure modules
Oscilloscope module, DC supply modules
Dry block calibrators for up to 1200°C
Pressure pumps, instrumentation test stand with manifold
Pressure adaptors & fittings kit, CalBench tool kit
EasyCal calibration software, peripherals supplied

Electrical Calibration

The CBP-WW1 features the 7051+ electrical multifunction calibrator and digital multimeter module. It provides users with automated calibration capabilities to cover a wide range of electrical and electronic test tools including:

Multimeters, signal sources, clamp meters, data loggers
Calibrators, decade boxes, RCL meters, conductance meters
Oscilloscopes, frequency meters, frequency counters, timer counters

Pressure Calibration

For pressure an automatic controller module is used for pneumatic calibration from vacuum to 20 bar. Also featured is a 200 bar regulated module and a selection of precision measurement modules providing range coverage to 700 bar. Accompanying pneumatic and hydraulic pumps are supplied. Calibrate pressure instrumentation such as:

Analogue and digital gauges, indicators, manometers
Calibrators, sensors, transducers, transmitters
Switches, valves, controllers, chart recorders

Temperature Calibration

The combination of modules, software and benchtop instruments enables users to perform automated calibration of temperature instrumentation. EasyCal can control dry block calibrators, and the 7051+ accurately simulates and measures Pt100 and thermocouples. This allows users to calibrate products including:

Sensors, transmitters, indicators, thermometers
RTDs, thermocouples, recorders, controllers
Process calibrators, PRTs, thermistors

EasyCal Calibration Software

The CBP-WW1 comes with EasyCal software on the 7051 control centre. This enables software driven testing procedures and provides increased speed of calibration and consistency of results.

Produce traceable calibration certificates and test reports for quality standards with additional uncertainty information for ISO 17025 conformance.

Details

Bench Type and Fittings

Item	Qty	Code	Basic Description	Basic Purpose
1	1	7080-HD	CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm) Framework bench style with worktop, perforated panel, primary console with 7082 mains power controller module.	Provides an ergonomic workspace for various applications. Modules are fitted to the primary console for the necessary workload.
2	1	7137	Perfo Panel Option: 40 piece Tool Hook Kit	For holding various tools and accessories.
3	1	7139	Perfo Panel Option: Shelf (W 450 x D 250 x H 130 mm)	Suitable for storing equipment and tools.
4	1	7133	Magnet Set for Perfo Panel (10 x round, 10 x hook type)	For securing documents and small tools to perfo panel.
5	1	7132	5 Drawer Unit (W 525 x D 550 x H 600 mm)	For storage of equipment, tools, documents, etc.
6	3	7134	Slotted Divider Kit for inside of drawer units	Partitions the drawer units for parts and components.
7	1	7123	Under bench CPU/Dry Block Calibrator Holder	For storing a dry block calibrator when not in use.

Modules

Item	Qty	Code	Basic Description	Basic Purpose
8	1	7051+	Multifunction Calibrator and Control Centre Module Advanced system package for precision source and measure capabilities. Integral calibrator, 6.5 digit multimeter, PC and EasyCal software. Operation via 12.1 ” touch screen display. Built-in communication with compatible modules.	Source and measure electrical, electronic, frequency, temperature. Enables users to calibrate process and electrical instruments like sensors, multimeters, clamp meters, scopes and more. EasyCal software and accessories included for automation, administration and certificate generation.
9	1	CCPAD	Control Centre Numeric Keypad Module with jog dial	Provides an ergonomic method of using the control centre module without mouse or keyboard.
10	1	8030B/G20b/CV2b/BARO	Automatic Pressure Calibrator Module with multiple ranges Sensor 1: 0 to 20 bar (300 psi), 0.01 % FS accuracy. Sensor 2: Vacuum to 2 bar (30 psi), 0.01 % FS accuracy. Sensor 3: Barometric Reference.	For automated pneumatic pressure calibration of gauges, transmitters etc. Auto-ranging capabilities across 2 sensors from vacuum to 20 bar (300 psi). Absolute pressure emulation with barometric reference. Supplied with contamination trap & hoses.
11	1	RMTEG-G200b/0.02	Digital Pressure Gauge Module with Regulator 0 to 200 bar (3000 psi), 0.02 % FS accuracy.	For high range pneumatic calibration work, with a line supply typically from a gas cylinder to enable regulator adjustment.
12	1	XTEG-G700b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 700 bar (10,000 psi), 0.02 % FS accuracy.	For hydraulic calibration with accompanying 7195 benchtop pump.
13	1	XTEG-G100b/0.02/M	Pressure Measurement Module with Control Centre Interface 0 to 100 bar (1500 psi), 0.02 % FS accuracy.	For mid/high range pressure calibration work. Used with pump or T-piece method from controlled output module.
14	1	XTEG-CV2b/0.02/M	Pressure Measurement Module with Control Centre Interface Vacuum to 2 bar (30 psi), 0.02 % FS accuracy.	For low range pressure calibration. Used with pump or T-piece method from controlled output module.
15	1	7085A	Auto Switching Temperature Distribution Module	Connection module to enable batch testing of temperature devices like thermocouples.
16	1	7053	56 V DC 4 A Adjustable Power Supply Module - Digital	A variable DC supply to supplement various applications.
17	1	7087	Quad DC Power Supply Module 6 V (20 A), 12 V (10 A), 24 V (6 A), 48 V (3 A).	Provides a DC power supply to various instrumentation and devices under test.
18	1	CCSCOPE-2208B	Control Centre Integral Oscilloscope (2 channel) 100 MHz with connection module, control centre operation.	For basic R&M applications, fault finding and diagnostic work.

Accompanying Products & Extras

Item	Qty	Code	Basic Description	Basic Purpose
19	1	7149	Electrical Vacuum Pump	Provides a vacuum for pressure modules.
20	1	7149-HCO	Housing & Connectivity Option for 7149 vacuum pump	Compact housing for the 7149 pump, situated under bench. Sound-proofed and power on/off via 7082 module on CalBench.
21	1	7195	Benchtop Hydraulic Pressure Calibration Pump Vacuum to 700 bar (10,000 psi).	Used for hydraulic pressure calibration with measurement modules.
22	1	7194A	Benchtop Pneumatic High Pressure Calibration Pump Vacuum to 200 bar (3,000 psi).	Pressure generation to 200 bar, suitable for use with pressure modules when compressed air source is not available.
23	1	7198	Pressure Calibration Accessories Kit A comprehensive selection of fittings, adaptors and hoses.	Provides all the required pressure connections and fittings for modules and pumps to UUTs.
24	1	8100	Benchtop Instrumentation Test Stand	For fast and ergonomic positioning of UUTs like transmitters & gauges on the CalBench worktop.
25	1	8072	Dry Block Calibrator (28 to 660 °C) With metric multi hole insert (1x3, 2x4, 1x5, 1x6, 1x9 mm), blank insert, EasyCal software driver pre-configured on control centre.	Temperature source for the calibration of probes, RTDs, and thermocouples. Manual control and EasyCal software compatible to automate calibration applications.
26	1	8072-METP	Pack of 16 Metric Inserts for 8072 3 mm to 20 mm holes	Inserts for use with different probe sizes, used with 8072.
27	1	8073	Dry Block Calibrator (100 to 1205 °C) With metric multi hole insert (3, 4, 6 mm), blank insert, EasyCal software driver pre-configured on control centre.	Temperature source for the calibration of thermocouples and sensors. Manual control and EasyCal software compatible to automate calibration applications.
28	1	8073-METP	Pack of 10 Metric Inserts for 8073 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 mm	Inserts for use with different probe sizes, used with 8073
29	1	8002	CalBench Environmental Monitoring System With magnetic rear for perfo panel mounting.	Measures and logs temperature, relative humidity and barometric pressure, with control centre interface.
30	1	CERTS	Traceable Calibration Certificates For all test modules and additional test equipment.	Certifies all measurement modules and additional instruments have been tested in the TE factory to international standards.

Downloads

File Name	File Size	Language	Format
CBP-WW1 CalBench Package Data Sheet	640 kB	EN	PDF

CalBench Packages Brochure

11.5 MB

PDF

CBP-WW1 CalBench Package

Features

Electrical Calibration

Pressure Calibration

Temperature Calibration

EasyCal Calibration Software

Details

CalBench Heavy Duty Version (W 2000 x D 850 x H 1568 mm)

Magnet Set for Perfo Panel (10 x round, 10 x hook type)

5 Drawer Unit (W 525 x D 550 x H 600 mm)

Slotted Divider Kit for inside of drawer units

Under bench CPU/Dry Block Calibrator Holder

Multifunction Calibrator and Control Centre Module

Control Centre Numeric Keypad Module with jog dial

Automatic Pressure Calibrator Module with multiple ranges

Digital Pressure Gauge Module with Regulator

Pressure Measurement Module with Control Centre Interface

Pressure Measurement Module with Control Centre Interface

Pressure Measurement Module with Control Centre Interface

Auto Switching Temperature Distribution Module

56 V DC 4 A Adjustable Power Supply Module - Digital

Quad DC Power Supply Module

Control Centre Integral Oscilloscope (2 channel)

Electrical Vacuum Pump

Housing & Connectivity Option for 7149 vacuum pump

Benchtop Hydraulic Pressure Calibration Pump

Benchtop Pneumatic High Pressure Calibration Pump

Pressure Calibration Accessories Kit

Benchtop Instrumentation Test Stand

Dry Block Calibrator (28 to 660 °C)

Pack of 16 Metric Inserts for 8072

Dry Block Calibrator (100 to 1205 °C)

Pack of 10 Metric Inserts for 8073

CalBench Environmental Monitoring System

Traceable Calibration Certificates

Downloads

Request a price quote

CBP-WW1 CalBench Package

Related Products

CBP-PROC1 CalBench Package

CBP-WW2 CalBench Package

CBP-WW3 CalBench Package

CBP-RM1 CalBench Package