- Accueil
- Produits
- Calibrateurs multifonctions
- 5011 : Calibrateur de Résistance / Température
5011 : Calibrateur de Résistance / Température
Caractéristiques Principales
- 1Ω à 120MΩ
- Simulation RTD
- Simulation thermocouple en option
- Fréquence jusqu’à 10MHz en option
- Interfaces RS232/GPIB/USB
- Fonctions accessibles en face avant
- Contrôle via logiciel EasyCal
Calibrateur polyvalent et de haute précision qui est avant tout une source programmable de résistance / RTD. Des options internes telles que la simulation de tension DC et thermocouples, courant DC, et fréquence 10MHz peuvent être ajoutées pour améliorer ses capacités.
L'étalonnage facile
Connectez le 5011 à un PC/portable (via RS233, GPIB ou USB) équipé du logiciel Time Electronics EasyCal et automatisez le processus d'étalonnage. Augmentez la vitesse d'étalonnage et la cohérence des résultats et produisez des certificats et rapports d'étalonnage suivant les normes de qualité ISO 9001.Standard Features
Resistance Range Accuracy Resolution 1Ω to 20Ω 0.01% +/- 5mΩ 1Ω 20Ω to 99.999Ω 0.01% +/- 5mΩ 1mΩ/5mΩ* 100Ω to 999.999Ω 0.01% +/- 5mΩ 1mΩ 1kΩ to 9.999kΩ 0.02% +/- 20mΩ 1Ω 10kΩ to 99.999kΩ 0.01% +/- 1Ω 1Ω 100kΩ to 999.99kΩ 0.01% +/- 10Ω 10Ω 1MΩ to 9.9999MΩ 0.02% +/- 100Ω 100Ω 10MΩ to 120MΩ 0.1% +/- 1kΩ 1kΩ * Output Setting Resolution below 50Ω is 5mΩ
Temperature Coefficient Less than 50ppm per °C Power Rating 0.1 Watt per resistor Maximum Voltage 250V Resistance Switch Time < 250μs Operation Time < 300ms End Resistance Variation < 2.5mΩ PRT Simulation RTD Type Alpha Coefficient Range Accuracy PT100 0.003850 -180 to -100°C 0.1°C PT100 0.003850 -100 to 850°C 0.05°C It should be noted that the accuracy of the PRT simulation is determined by the accuracy of the PRT tables (BS EN 60751) published by the British Standards Institute. The 5011 uses precise digital interpretation of the tables to output resistance values that are within the accuracies specified in the table.
Options (order code in brackets)Thermocouple Simulation (9711) Type Range °C Accuracy °C J -210 to 150 / 150 to 1200 0.15 / 0.3 K -270 to 190 / 190 to 1250 0.5 / 0.6 T -200 to 150 / 150 to 400 0.4 / 0.5 R -50 to 800 / 800 to 1750 0.8 / 2.0 S -50 to 850 / 850 to 1750 0.9 / 2.0 B 100 to 1200 / 1200 to 1800 1.0 / 2.0 N -270 to 260 / 260 to 1300 0.5 / 0.4 E -50 to 1000 0.3 Cold Junction Compensation +/- 0.5°C (applies to ambient changes of less than +/- 1°C at 23°C).
The accuracy of the thermocouple simulation is determined by the accuracy of the 5011’s DC voltage function and the accuracy of the standard thermocouple tables (BS EN 60584-1) published by the British Standards Institute. The 5011 uses precise digital interpretation of the tables to output voltage levels that are within the accuracies specified in the table.DC Voltage* (9711) Range Accuracy Resolution 20mV 100ppm + 4μV 100nV 200mV 30ppm + 6μV 1μV 2V 25ppm + 20μV 1μV 20V 25ppm + 150μV 10μV * Specifications apply from 10 to 100% of range. 10% over range.
DC Current* (9718, requires 9711 option to be fitted also) Compliance Voltage: 11V Range Accuracy Resolution 200μA 150ppm + 15nA 1nA 2mA 100ppm + 40nA 10nA 20mA 80ppm + 200nA 10nA 200mA 80ppm + 3μA 100nA * Specifications apply from 10 to 100% of range. 10% over range.
Digital Frequency / Period (9729): 2V pk/pk approx Range
0.1Hz to 10MHz / 100ns to 10s
Accuracy 20ppm
General SpecificationsWarm up 30 minutes to full accuracy Settling Time Less than 5 seconds Standard Interfaces GPIB (IEEE-488), RS-232, USB Temp Performance
Operating: 0 to 40°C, Full Spec: 23°C +/- 5°C, Storage: -10°C to 50°C
Operating Humidity < 80% non-condensing Operating Altitude 0 to 3km. Non operating: 3km to 12km Line Power 100 - 230V AC 50/60Hz. Power Consumption 60W typical, 80W Max. Dimensions W450 x D272 x H152mm (18 x 11 x 7”) Weight 7kg (15.4lbs) Country of Origin UK Supplied With
Manuel, RS-232 cable, and USB adaptor/cable
Modèles 5011
Calibrateur de Résistance / Température
Options Internes 9711 Option de tension DC et simulation de thermocouples 9718 Courant Option (220mA max) 9729 Fréquence Option (10MHz digital) 9733 Bornes du panneau arrière Options Externes et Certificats de Calibration 9728 Kit de montage rack 19” 9541
Set de câbles de mesure Basic - Voir Fiche technique
9796
Set de câbles de mesure Premium - Voir Fiche technique
C171 Certificat de Calibration Usine C115 Certificat de Calibration UKAS (ISO 17025) Logiciel de calibration et accessoires ECFLA
Logiciel EasyCal
9795
Kit d'imprimante et extras - Voir Fiche technique
9777 Lecteur de code-barres - Voir Fiche technique 9778 Imprimante d'étiquettes - Voir Fiche technique Téléchargements PDF Nom du fichier Taille du fichier Langue 418kB
EN
4MB (Low resolution)
EN
8MB (Higher resolution)
EN
182kB
EN
Appel d'offre
5011 : Calibrateur de Résistance / Température
Produits connexes
-
5018 : Calibrateur de Tension / Courant AC/DC
- Précision 15ppm
- Résolution 0,5ppm
- Tension DC 20mV-200mV-2V-20V
- Fonction rampe
- Interfaces RS232/GPIB/USBaces
- Idéal pour les applications ATE
- Contrôle via logiciel EasyCal
-
5025C : Calibrateur Multifonction
- 15 ppm pour métrologie
- Calibrer multimètres
- 11 fonctions standard
- 0 - 1050V & 0 - 22A (AC/DC)
- Capacité & resistance
- Simulation Thermocouple/PT100
- Étalonnage de puissance
-
5025E : Calibrateur Multifonction
- 40 ppm pour métrologie
- Calibrer multimètres
- 11 fonctions standard
- 0 - 1050V & 0 - 22A (AC/DC)
- Capacité & resistance
- Simulation Thermocouple/PT100
- Étalonnage de puissance
-
Logiciel EasyCal
- Automate the calibration process
- Control TE calibrators & DMMs
- Automated planning & scheduling
- For use with multiple devices
- 1200+ cal procedures included
- Management/admin features
- Easily produce certificates & reports