- Accueil
- Produits
- ATE / Bench Calibrators & Multimeters
- 5077 : Calibrateur de Puissance
5077 : Calibrateur de Puissance
Caractéristiques Principales
- 22A AC/DC
- Courant en option:100A AC
- 1050V AC/DC
- Angle de phase ± 90°
- Facteur de puissance 0,00 à 1,00
- 45 à 400Hz par pas de 0,1Hz
- Interfaces RS-232 / GPIB / USB
Calibrateur de puissance haute précision dédié à la calibration des wattmètres, mesureurs de puissance et mesureurs de kW/h. Livré avec son logiciel « face avant virtuelle » permettant à l’utilisateur de contrôler l’appareil à partir d’un PC.
L'étalonnage facile
Connectez le 5077 à un PC/portable (via RS233, GPIB ou USB) équipé du logiciel Time Electronics EasyCal et automatisez le processus d'étalonnage. Augmentez la vitesse d'étalonnage et la cohérence des résultats et produisez des certificats et rapports d'étalonnage suivant les normes de qualité ISO 9001.Technical Specifications
DC Voltage Range Accuracy 1 year Output Resistance Max Output Current Resolution 0.02 to 2V *0.01% + 500μV < 0.5Ω 20mA 1μV 2 to 20V *0.01% + 500μV < 0.5Ω 20mA 10μV 20 to 300V 0.02% + 30mV < 5Ω 20mA 100μV 300 to 1050V
0.05% + 50mV
< 10Ω
10mA
1mV
*Accuracy is specified at minimum current output.
DC Current Range Accuracy 1 year Compliance Voltage Resolution 0.02 to 2A 0.03% + 500μA 5V 100μA 2 to 22A 0.05% + 6mA 4V 1mA AC Voltage (45Hz to 400Hz 0.02% accuracy) Range Accuracy 1 year Output Resistance Max Output Current Resolution 0.1 to 2V *0.03% + 500μV < 0.5Ω 20mA 100μV 2 to 20V *0.03% + 2mV < 1Ω 20mA 1mV 20 to 300V **0.06% + 30mV < 5Ω 20mA 10mV 300 to 1050V
**0.08% + 90mV
< 10Ω
10mA
100mV
*Accuracy is specified at minimum current output.
**Accuracy is specified at 100Hz for current outputs less than 5A.AC Current (45Hz to 400Hz 0.02% Accuracy) Range Accuracy 1 year Compliance Voltage Resolution 0.1 to 2A 0.1% + 2mA 3.5V 100μA 2 to 22A 0.1% + 20mA 3V 1mA Phase Angle (Applies to outputs above 22 Volts) Frequency Range Accuracy 1 year Resolution 45 to 99Hz -90.0 to +90.0 deg 0.3 deg 0.1 deg 100Hz to 400Hz -90.0 to +90.0 deg 1 deg 0.1 deg Power Factor Frequency Range Resolution 45 to 400Hz 0.00 to 1.00 0.01 The accuracy of the power is complex and is determined by using a formula, which combines the errors due to Voltage, Current, and Phase.
Power Accuracy (%) = SqrRt (Voltage accuracy2 + Current accuracy2 + Phase Correction2)
Where Phase Correction (%) = 100x(1-Cos(Phase+PhaseAcc)/Cos Phase)
General SpecificationsWarm up 1 Hour to full accuracy Settling Time Less than 5 seconds Standard Interfaces
GPIB (IEEE-488), RS-232, USB
Temp Performance Operating: 0 to 40°C, Full Spec: 23°C +/- 5°C, Storage: -10°C to 50°C Operating Humidity < 80% non-condensing Operating Altitude 0 to 3km. Non operating: 3km to 12km Line Power 100 - 230V AC 50/60Hz. Power Consumption 60W typical, 80W Max. Dimensions
W440 x H198 x D580mm (17.6 x 7.8 x 32.8”)
Weight 25kg (36lbs) Country of Origin UK Supplied With
Virtual control software, Manuel, RS-232 cable, and USB adaptor/cable
Modèles 5077
Calibrateur de Puissance
Options 9790
Transformateur courant AC - Voir Fiche technique
9780
Adaptateur pinces x50 tours - Voir Fiche technique
9735 Set de câbles de mesure C160 Certificat de Calibration Usine C124 Certificat de Calibration UKAS (ISO 17025) Logiciel de Calibration et Accessoires ECFLA
Logiciel EasyCal
9795
Kit d'imprimante et extras - Voir Fiche technique
9777 Lecteur de code-barres - Voir Fiche technique 9778 Imprimante d'étiquettes - Voir Fiche technique 9597 Cable GPIB 9743 PCI - GPIB carte d'interface 9794
Adaptateur USB - GPIB
Téléchargements PDF Nom du fichier Taille du fichier Langue 621kB
EN
235kB
EN
284kB
EN
4MB (low resolution)
EN
8MB (Higher resolution)
EN
Appel d'offre
5077 : Calibrateur de Puissance
Produits connexes
-
5018 : Calibrateur de Tension / Courant AC/DC
- Précision 15ppm
- Résolution 0,5ppm
- Tension DC 20mV-200mV-2V-20V
- Fonction rampe
- Interfaces RS232/GPIB/USBaces
- Idéal pour les applications ATE
- Contrôle via logiciel EasyCal
-
5025C : Calibrateur Multifonction
- 15 ppm pour métrologie
- Calibrer multimètres
- 11 fonctions standard
- 0 - 1050V & 0 - 22A (AC/DC)
- Capacité & resistance
- Simulation Thermocouple/PT100
- Étalonnage de puissance
-
5051 Plus : Système de Calibration Multifonctions
- Calibrateur / multimètre / PC
- 0 - 1050V & 0 - 22A (AC / DC)
- Source à la résistance 1GΩ
- Thermocouple simulation / mesure
- PT100, la capacité, l'inductance
- Calibration de pinces
- Logiciel EasyCal inclus