7090 Pneumatic Calibration Pump

7090 Pneumatic Calibration Pump
• Pressure to 40bar (600psi)
• Vacuum to -950 mbar
• Oversized check valve for controlled operation
• Non-oil based lubricant used on all moving parts
• Quick Release Fitting
• Hoses and Carry Bag Included

Features include contoured cushioned handles for comfort and control, protective caging for the vent valve, and dual o-rings on all pistons to ensure zero leakage.

Bench Home Page
Introduction
QuickView Datasheet (pdf)
Full Datasheet (pdf)
Build a Calibration Bench
Bench Photo Portfolio
CalBench Price Quote Form
Bench Ordering Information
7089: Optional digital pressure gauge
Digital Pressure Gauges

Can display pressure in bar, mbar/hpa, kPa, MPa and PSI, the user can set the zero reference or use factory default. Maximum and minimum pressures can be stored.

7071 – Vacuum. 0.25% Accuracy

7089 – 40bar. 0.25% Accuracy

7096 – 700bar. 0.25% Accuracy

7078 – Vacuum to 200bar, auto-ranging. 0.1% Accuracy
7095 Hydraulic Calibration Pump
7095 Hydraulic Calibration Pump

• 0 – 700bar (10,000psi)
• Priming feature
• Triple filtration (prevents failure caused by dirt)
• Non-oil based lubricant used on all moving parts
• Built in pressure relief valve (prevents over pressurizing)
• Hoses and Carry Bag Included

7096: Optional digital pressure gauge. Features see above.
7097 Minimess Test Kit
7097 Minimess Test Kit

A selection of items from the Minimess 1620 series connectors used on the high-pressure calibration modules.
The kit includes In-line tees for 1/4”, 3/8” and 1/2” BSP, and a capped Minimess / 1/4” BSP test point enabling easy quick connection to most pressure systems.
Also included are two reducing bushes, male to female, 1/2” / 1/4” BSP and 3/8” to 1/4” BSP. 3 Dowty washers, a gauge adaptor, one Microbore hose and a cloth wipe.
The whole kit comes in a convenient plastic case, with cut outs for gauges if required. The adaptors are made of mild steel.