Bench Home Page
Introduction
QuickView Datasheet (pdf)
Full Datasheet (pdf)
Build a Calibration Bench
Bench Photo Portfolio
CalBench Price Quote Form
Bench Ordering Information
Ordering Information
Code
Bench Frame/Consoles/Work top/Mains Power Module
Bench frame, back panel, work top, primary console, mains power control and distribution with 2 x output sockets (7082), 4 x under console sockets, and under console lighting
7080
Secondary console 2000mm
7081
Mains power control/distribution Module with output sockets.
NOTE: This module is included in every bench as standard.
Socket type and power requirement must be specified when ordering.
7082
Isolated mains output sockets option for 7082
7063
110V 5A DC option for 7082
7075
Bench Fittings:
2 draw unit (mounted under worktop)
7121
Bench cabinet (mounted under worktop)
7120
Extendable Dry Block Calibrator shelf
7126
Pull-out roller bearing keyboard tray
7122
Under counter CPU holder (vertical)
7123
Under counter CPU holder (horizontal)
7124
Tool Holder/Rack for perforated panel (only available if 7081 is not required)
7125
Pressure Calibration Modules, Pumps, Test Sets:
Pressure calibrator with regulator (vac, 0.2, 2, 5, 10, 20 bar)
7062
Combined Vacuum/Pressure Calibrator (vac, 0.2, 2, 5, 10 bar)
7059
High pressure calibrator with regulator (35, 70, 100, 200 bar)
7064
Pressure indicator (0.2, 2, 5, 10, 20, 70, 100, 200, 400, 600 bar)
7065
Multifunction Pressure Indicator (vac, 0.2, 2, 5, 10, 20, 70, 100, 200, 400, 600 bar)
7038
Differential Pressure Calibrator (vac, 0.2, 2, 5, 10 bar)
7066
Automatic Pressure Calibrator (0.2, 2, 20 bar)
7032
Line Pressure Controller (5, 35, 70 bar)
7084
Pressure Option Codes (bar):
0.2= 7100
2=7101
5=7102
10=7103
35=7105
20=7104
70=7106
100=7107
200=7108
400=7109
600=7110
VAC=7111
Hand Pump - Pneumatic (40 bar) in case with hoses
7090
Digital Pressure Gauge for above
7089
Hand Pump - Hydraulic (700 bar) in case with hoses
7095
Digital Pressure Gauge for above
7096
Set of hoses/adaptors for connections to modules and pumps
7073
Minimus high pressure hose test kit
7097
Electrical / Temperature / Loop Modules and Dry Block Calibrators:
60V DC 3A Adjustable Power Supply
7086
Quad DC Power Supply
7087
Adjustable AC Supply 0 - 270V/10A
7088
Dual 24V DC Power Supply
7083
5065B 6.5 Digit Multimeter Module
5065B
5075B Precision DMM Module
5075B
Process Calibrator Module
7061
Temperature Distribution Module (Thermocouple and RTD)
7085
PT100 Simulator Module (module version of 1049)
7001
Temperature and Process Calibrator (module version of 1090)
7077
RTD Temperature Calibrator Module
7068
Loop Calibrator Module High Precision
7067
Loop Calibrator Module
7069
Loop Ancillaries Module
7079
Dry Block Calibrator -17 to 140 °C
7070
Dry Block Calibrator 33 to 650°C
7072
Multifunction Calibrator and Control Centre:
7051
AC/DC 20V/220mA. Decade Resistance 0 - 1G ohm, Sim Resistance 0 - 40M ohm
PT100 (-100°C to 400°C), Thermocouple Simulation (J,K,R,T,S,B,E,N), 10MHz Freq
DMM 6.5 Digit (AC/DC 1kV/3A, 100M ohm, 300kHz) 10.5" colour LCD/touch screen
EasyCal, Printer and Connectivity kit
Supplied with 7051 module
7051 Multifunction Calibrator and Control Centre Options:
Hi Voltage/Current option AC/DC 1kV/22A (Multimeter Calibration)
9782
Capacitance (1000pF- 100uF) / Inductance (1mH - 10H)
9798
High Frequency AC Voltage (1MHz Max. 20mV - 20V )
9771
Scope Calibration (1mV to 200V, 0.1Hz - 100 MHz, < 1nS risetime)
9770
Optical Tacho Adaptor
9773
Clamp Meter Adaptor (1 & 50 turn coil)
9780
Test Lead Set
9796
For additional 7051 options view 5051 Page
For additional EasyCal options view EasyCal Page
Additional Equipment
The CalBench consoles can fit all TE products not specified above, including decade boxes, portable calibrators etc. A variety of non TE instruments such as dmm's, oscilloscopes, power supplies and more can also be fitted upon request. Please contact us for pricing and configuration.

Extra laboratory equipment such as side tables, bench stools, trollies, shelving systems, and more are also available.