MENU
UK
  • EN
  • FR
  • ES
Search
Tel: +441732355993

Control Centre and Custom Modules

  • Control Centre Modules

    CalBench can be fitted with various control centre options depending on customer requirements. Primarily the control centre is a touch screen PC that connects internally to the compatible modules within the CalBench console. When a 7051 or 7051+ (multifunction calibrator/multimeter/PC) is ordered the standard control centre (CC10) is part of the module.

    Control Centre modules are also available without the 7051 modules:

    • CC10: Control Centre Module with integral PC and 10.4” capacitive touch screen.
    • CC12: Control Centre Module with upgraded integral PC and 12.1” capacitive touch screen.
    • CC12A: 7051 Control Centre Upgrade - To CC12 upgraded integral PC and 12.1” capacitive touch screen.
    • Ports: Front panel: 4 x USB / Rear of console: 2 x USB and 2 x RS-232
    • Connects internally to programmable CalBench modules
    • EasyCal software and PC accessories optional

     

    Custom Design Modules

    Specific devices and instruments can be custom fitted into the bench as per customer requirement. This allows the user to integrate a familiar instrument into the workstation.

    • External instruments such as handheld DMMs, analysers, and more
    • Fitted instruments can be configured to communicate with EasyCal software
    • Additional power sockets and controller modules
    • TE Gauge pressure indicator modules
    • Portable instruments can be fitted to perforated back panel for easy removal
    • Empty module space can be made into shelving for tool storage
    • Depth constraints are 425mm for the primary console, 200mm for the secondary
  • Control Centre Specifications - CC10 and CC12
    Processor 64 bit Dual Core
    RAM CC10: 4 GB / CC12: 16 GB
    Hard Drive CC10: 60 GB Solid State / CC12: 120 GB Solid State
    Ports Front: 4 x USB / Rear of Console: 2 x USB, 2 x RS-232
    Display CC10: 10.4” Capacitive Touch Screen / CC12: 12.1” Capacitive Touch Screen
    Operating System Windows 8.1
    Internal Module
    Connections
    Modules that can be controlled via EasyCal software or PC programs are connected internally as standard (inside console).
    Options EasyCal software and PC accessories (see EasyCal brochure)
    Module Width 315mm. Typically fitted centrally in the primary console
    CC10 & CC12 (without 7051) can be fitted in 7081 secondary console.
    Custom Design Modules
    Details
    • Specifications will depend on the requested instrument for integration.
    • If customer requires TE to select and fit a third party instrument, then only reputable brands will be used.
    • Instruments for fitting must meet the limitations of the CalBench Consoles (either primary or secondary).
    • Depth constraints are 425mm for the primary console, 200mm for the secondary
    • Modifications to existing modules are available, subject to design changes.
  • Control Centre Modules

    CC10

    Control Centre Module with PC and 10.4” capacitive touch screen

    CC12 Control Centre Module with upgraded PC and 12.1” capacitive touch screen
    CC12A 7051 Control Centre Upgrade to CC12 PC with 12.1” capacitive touch screen
    Options
    ECFLA EasyCal Calibration Software

    Custom Design Modules are configured upon request.

  • PDF Downloads
    File Name File Size Language
    Control Centre Modules Data Sheet 360kB EN

    Custom Design Modules Data Sheet

    386kB

    EN