The 7064 Features a 4.5
digit display with 5 selectable units.
External line pressure (pneumatic) is connected to the console
rear panel.
Output pressure is controlled by a non - relieving type
regulator, with Bleed and Block needle valves used to vent
and isolate the output port. All connections are Minimess
high-pressure type.
Fully integrated with the 7051 Control
Centre and EasyCal the user can define pressure calibration
procedures.
| Specifications |
| Range
|
35 |
70 |
100 |
200 |
| Resolution (bar) |
0.01 |
0.01 |
0.01 |
0.01 |
| Regulator |
Yes |
Yes |
Yes |
Yes |
| Acc % +/- 1 digit |
0.04 |
0.04 |
0.04
|
0.1 |
| Temp Stability |
Less than 70 ppm per degC
|
| Units |
Bar, PSI, kPa, Mpa, inWg,
cmWg, inHg, mmHg, Kg/cm2, atm** |
| Maximum Pressure |
1.5 x range |
| Sensor |
Piezo-resistive – stainless
steel diaphragm |
| Over press warning |
1.2 x range full scale –
audio and visual (on LCD) warning |
| Fittings |
Minimess |
| |
** Specify on ordering: 5
pressure units max |
| General Information and
Options |
| Panel size |
Width 200 x Height 201mm |
| Order code |
7064 / Pressure range option
code |
| Pressure Options |
7105 = 35bar range
7106 = 70bar range
7107 = 100bar range
7108 = 200bar range
|
|
